No. 7 Vertical AHU
No. 2 air extractors For a new line MAN ROLAND SUPPLY LIST: The photos and diagrams of equipment are indicative. |  |
Exhaust fans - the EC - - Structure in aluminum profiles.
- Panels made of galvanized and prepainted steel on the outside.
- Inspection door.
- Centrifugal fan comprising:
- · Electric motor,
- · Transmission belts,
- · Sled tend belt
- · Body and impeller made of galvanized steel
- · Base of support.
- Air flow: 25,000 m3 / h
|  |
AIR FILTER FOR A CAMERA POCKET - Galvanized steel frame.
- Glass fiber filter media.
- Class F5
|  |
SHUTTERS PAE-RIC - Galvanized steel case.
- Extruded aluminum fins.
- Compasses Ø35 for rotation of the fins.
|  |
BATTERY COOLING WATER - Galvanized frame.
- Pipes copper / iron.
- Fin / iron.
- Air flow 8500 m3 / h
- Salto heat 34-26 ° C
|  |
CASSONCINO DELIVERY AIR-CE - - version vertical column placement Floor
- Structure in aluminum profiles.
- Panels made of galvanized and prepainted steel on the outside, insulated with polyurethane foam injected between the two sheets.
- Inspection door.
- Centrifugal fan comprising:
- · Electric motor,
- · Transmission belts,
- · Sled tend belt
- · Body and impeller made of galvanized steel
- · Base of support.
- Air flow: 8500 m3 / h
|  |
SPEAKER perforated sheet self-balancing LOW SPEED ' - Version upright at floor
- Galvanized steel construction
- Rear-end collision (towards wall support)
- Internal calibration for balancing air flow in galvanized steel.
|  |
DUCTS AND CHIMNEYS | |
OVER OUTSIDE AIR DUCTS - Made of galvanized sheet.
- Network anti-bird.
- Grid rain DR4.
- No. 1 from 42,500 m3 / h (5-CTA)
- No. 2 of 8500 m3 / h (for other CTA)
|  |
CONDUCTED IN CONNECTION WITH CONDITIONERS - Made of galvanized sheet.
- Thermal insulation except the outside the building.
- from 42,500 m3 / h (5-CTA)
|  |
FIRE AIR EXPULSION - Constructed in galvanized
- Version rectangular shape.
- 25,000 m3 / h
|  |
INSTRUMENTATION | |
ELECTRIC VALVE - Electric three-way valve for regulating refrigerant
|  |
Electric Actuators - Electric actuator for adjusting damper
|  |
ELECTRICAL - Built according to CEI 17-13/1 EN60439-1.
- Possibility of ignition of components in automatic watch program or by manual control.
|  |
INSTRUMENTATION - Electronic regulator Multiprocess to PLC.
- Control panel on the front panel with keypad and alphanumeric display.
- Outputs electronic control valves, pistons, etc..
- Located in the electric plant.
|  |
REMOTE - Modem.
- Electronic converter.
- Tele-assistance service through our. After-sale.
|  |
ELECTRONIC PROBES IN THE FIELD - N ° 2 temperature probes
- N ° 1 outdoor temperature probes
|  |
INVERTER - Inverter for adjustable dampers
|  |
TRANSPORTATION / INSTALLATION / TESTING | |
| TRANSPORT |  |
| MOUNTING |  |
SCAFFOLDING - Supply of scaffolding needed for the assembly of our equipment, all the time necessary to complete the work.
|  |
LIFTING - Necessary means for lifting at the foot of the work of our equipment, all the time necessary to complete the work
|  |
Occupations - Staff help our editors to the assembly plant.
|  |
| STARTING AND TESTING BY OUR TECHNICIANS |   |
CHILLED WATER HYDRAULICS | |
CHILLED WATER HYDRAULICS - Plant for chilled water distribution from the refrigerator to the air handling units
- Circuit return
- Cooling coil connection and mounting accessories
- Thermal insulation for chilled water
- (Excluded circulation pump and expansion tank)
|  |
ELECTRICAL SYSTEM | |
ELECTRICAL SYSTEM - Electrical system between our electrical panel and all components in the field.
- Note
- It remains, however, include the facility for connection to the electrical panel from our primary source.
|  |
