 | Installation example
The information in this page are only a partial and summary statement of the real project.
The purpose of this text is only to provide a rough track.
Reference project: PC 5630 date 19-03-2009
Air conditioning systems for apartments for residential purposes: |
Brief description of the components CENTRAL HEAT AND REFRIGERATION SYSTEMS | | 1 Group brand thermal RIELLO Condex PRO SYSTEM
100M from 90 KW hot water and condensing
low emissions, certificate 4 stars, Type C63,
consists of: No. 1 assembled modules CONDENXA PRO 100 M
Complete with external probe temperature control climate for the management of variable temperature and water temperature in the plant discharge (Master) The maximum operating pressure is 6 bar. Building Single Module Description: ● Support painted frame with adjustable feet ● outer coat consists of white metal panels, assembled with removable snap grafts for total accessibility to the boiler burners ● ● microflame low emissions with electronic ignition control flame ionization electrodes only ● exchangers with 50 kW corrugated bimetal coil: copper and stainless steel water side smoke side ● modulation ratio> 3:1 (50 kW) ● Climate operation with external probe for version M (Master) ● display boiler status display, temperature parameters and self-● ●-pole switch is accessible from the switch section for each thermal element ● Safety thermostat with manual reset on each element thermal probes ● Boilers NTC supply and return pressure ● Safety differential water circulation ● safety valve relief valve 5.5 bar ● ● Automatic switch on the supply and return manifold check valve ● ● ● probe on each element probe smoke fumes on each element ● water collectors painted, square blocks ● gas manifold painted yellow and flanged fittings with clamping ● ponpa of ignezione ● ● faucets and drain the condensate drain antifreeze tier system for temperature up to 3 ° C
● anti-lock circulator
● function antilegionella for any combination kettle ● predisposition to handle up to 60 heating elements controlled by the boiler master version, with rotation of the sequence and selection of waterfall strategy ● Input 0-10 Vdc linear demand for heat or power to temperature ● Relay output for remote signaling alarms
● preparation for possible connection to kettle
complete external probe / thermostat and circulator, a
plant directly circulator and thermostat and a
plant mixed with circulatory mixing valve
or a mixing valve and thermostat
independent of which pump is operated externally by
a thermostat and a boiler circulating
● Maximum operating pressure 6 bar heating
● comply with CEI
● Electrical protection IPX4D
● Low emission NOx Class 5: 10/11 20 ppm
(17.6 / 19.36 35.2 mg / kW)
● comply with Directive 90/396/EEC - CE
● comply with Directive 89/336/EEC
(electromagnetic compatibility)
● comply with Directive 73/23/EEC (low voltage)
● comply with Directive 92/42/EEC (efficiency)
4 stars
Material accompanying
● LPG conversion kit
● gas tap for each thermal element
● tap loading and unloading for each thermal element
● Hydraulic 1 "
● external probe NTC
● Cardboard mounting template
● Certificate of equipment warranty
●'s instructions for the user and the installer and
SERVICE POLICY
● Product identification label
● first ignition combustion testing and test
in place
2 collectors collection and intubation in buttonhole technique
PP DN 125 brand RIELLO comprising:
No. 1 BASIC kit with manifolds fumes left output DN 125
No. 1 Kit gully trap with condensate drain DN125
m 14 meters of pipe DN 125
in place
3 socket kit safely ISPESL brand RIELLO code
4030027.1 complete the following equipment
● control well ISPESL
● Probe VIC
● Thermostat ISPESL approved
● thermometer ISPESL approved
● Pressure gauge with curl, flange and tap ISPESL approved
● Pressure ISPESL approved
in place
Kit 4 valve fuel VIC 11 / 4 "
flange connecting brand RIELLO code 4030038
be connected to the collector gas already prepared
in place
Kit 5 probe sent brand RIELLO code 4030036
in place
6 Geothermal heat pump Geothermal International brand
mod EKW130 having the following characteristics:
size 1854mm high, 610mm wide, 1321mm long
distance not less than 1000mm from the rear, 1000mm from the
machine front, 700mm side
Powers: Heating: 227KWt
Cooling: 269KWt
distance between a pump and one 600mm
Pressure loss for each PDC I have a charge loss
of 45.00 Kpa
Hot outlet temperature: 38.5
Cold outlet temperature: 6-10 ° C
Flow 7.60 l / s pump, and 15.2 l / sec
in place
Condensate Neutralizer Kit 7 acid type RIELLO
Code 4031810
in place
8 Labels of identification circuits made of material
with protective plastic mounted on aluminum support
in place
9 Groups loading heating and conditioner
brand code CALEFFI 553,140 each consisting of:
PRV D = 1 / 2 "with pressure gauge
Built calibrated to 1.5 bar plant in the cold.
in place
10 pressure indicator code brand CALEFFI 557,704
bottom connection D = 3 / 8 "with 6 bar and full scale
steel housing printed, hand reference
D. 80 constructed in accordance ISPESL to install on
pressure line to a maximum distance
1 m. last module, complete with:
faucet portamanometro and Trevi with flange
ISPESL gauge D = 3 / 8 "with male
female type CALEFFI code 690,300, serpentine
copper type shock code CALEFFI 691,300
in place
11 Bimetal Thermometers immersion satisfying
standards ISPESL brand CALEFFI code by 688,100
piping to be installed on each round
return of each area and complete with:
pressed steel housing with scale D = 80
temperature from 0 ° to +120 ° C and rear connection,
cockpit brass D = 1 / 2 "45 mm
in place
12 Expansion vessels membrane seamed brand
With attack code CALEFFI 556,100 D = 3 / 4 "to 100 liters
Preloaded with nitrogen to 2.5 bar (check first
the installation according to the real content of IMP.)
in place
13 Expansion vessels membrane seamed brand
With attack code CALEFFI 556,150 D = 3 / 4 "to 150 liters
Preloaded with nitrogen to 2 bar (check first
the installation according to the real content of IMP.)
in place
14 Expansion vessels membrane seamed brand
With attack code CALEFFI 556,050 D = 3 / 4 "to 50 liters
Preloaded with nitrogen to 1.5 bar (check first
the installation according to the real content of IMP.)
in place
15 safety valve spring diaphragm qualified
ISPESL calibrated to 3 bar with socket D = 1 "x11 / 4"
brand code CALEFFI 527,425 to install
a maximum distance of 1 m from the boiler
fuel supply line full of funnel exhaust
visually articulated curve D = 11 / 4 "art. 5521
in place
16 Y magnetic filter antiinpurità with steel mesh
steel flange DN 80 type Rexital model Y
in place
Electronic circulation line 17 for heating low temperature
plant-floor buildings northeast side D3-E1-E2-E3
brand model GRUNDFOS MAGNA 50-120 F with the
following features:
electric motor powered 1x230-240V 50 Hz
Maximum Power 800 W 3.5 A
energy class A
complete with flange connection
in place
Electronic circulation line 18 for heating low temperature
plant-floor buildings southwest side D-D2
brand model GRUNDFOS MAGNA 40-120 F with the
following features:
electric motor powered 1x230-240V 50 Hz
Maximum Power 450 W
energy class A
complete with flange connection
in place
19 Adjusting brand consists of the following CHECKS
equipment:
No. 2 DDC controller mod. MN550-ARC
No. 1 Display touchscreen mod. MN50-TSP
No. 30 engineering No. 1 point original mod. MN-ING
No. 30 commissioning No. 1 point original mod. MN-MIS
No. 1 display engineering mod. MN-ENG-TS
No. 5 probe immersion mod. STC72L
in place
20 Circulator electronics recycling domestic water
alimenrazione exchanger to quickly prepare brand
GRUNDFOS UP 2045 N with the following characteristics:
electric motor powered 1x230-240 V 50 Hz
Maximum Power 115
complete with flange connection
in place
21 rapid preparation of warm water HFL Series
AFK comprising:
● 1000 liters storage in steel with treatment Zetaflon
● plate heat exchanger model K042/21
● recirculation pump side of health
● Thermometer
● thermostat for the primary circuit
● primary pump electrical control panel
● Connection fittings
● 50 mm polyurethane insulation flexible
● soft PVC exterior finish
in place | 22 rapid preparation of warm water HFL Series
AFK comprising:
● 2000 liters storage in steel with treatment Zetaflon
● plate heat exchanger model F3121-1NH
● recirculation pump side health GRUNDFOS UPS 32-80
● Thermometer
● thermostat for the primary circuit
● primary pump electrical control panel
● Connection fittings
● 50 mm polyurethane insulation flexible
● soft PVC exterior finish
in place
23 chilled water accumulation For use as puffer
brand HFL Series VK 1500 liter includes:
● accumulation liters in 1500 Steel
● 50 mm polyurethane insulation flexible
● soft PVC exterior finish in place
24 line electronic circulation pumps geothermal
brand GRUDFOS UPED 100-60F with the following
Features:
electric motor powered 3x400V
Maximum Power 1160 W
Energy Class B
complete with flange connection
in place
25 safety valve spring diaphragm qualified
rated at 3 bar with socket D = 3 / 4 "x1" type
CALEFFI 527,530 to install code on the line
desuperheater complete with funnel
exhaust exposed curve articulated D = 1 "art. 552160
in place
26 Filter type CILLICHEMIE model Cillit Multipurpose DN-80 M
12938th code for filtering general cold water
in place
27 anti-legionella water treatment systems (disinfection
chemistry), and softener dispenser polyphosphates for the production
hot water type formed by CILLICHEMIE
following devices and components:
No. 2 meters DN M 50 U cod. 12457AA
No. 1 Cillit-DP 8.8 INEX DIS - 8 liters - 8 BAR cod.12532AA
No. 1 Cillit-DP 8.8 INEX - 8 liters - 8 BAR cod.12530AB
No. 2 tanks 229 UNI 200 liter cod. 30942
No. 2 level probes tanks 200/1000 liters cod. 30941
No. 1 Cillit-INJECTOR OPTI 1-10 cleanable cod. 12485
No. 1 box Cillit KLOREN from 10 kg cod. 30070
No. 5 Cillit Impulsan Special 20-l cod.10093
Cillit No. 1 M-BA PILOT 1001 1xC cod. 31905AD
No. 1 mixing valve 2 "cod. 31973
No. 1 Cillit INEX-DP 2:10 - 2 liters - 10 bar code. 12529AB
No. 1 tank based LB 128 to 100 liters cod. 12565AB
No. 1 level probe tank 100 liters cod. 12560
in place
28 Addittivi descaling and corrosion to equipment
Closed loop heating brand CILLICHEMIE
Cillit-HS 23 COMBI (to be verified before
inclusion based on actual water content
plant)
in place
29 Kit additive concentration control HS 23 COMBI
brand CILLICHEMIE
in place
30 Disconnectors by zones of different pressures not
controllable brand CALEFFI art. 573,500 3 / 4 "
in place
31 brand electronic thermostatic mixer CALEFFI
Code 600,008 DN 80 with thermal disinfection Legionella
in place
32 Safety valves spring diaphragm qualified
rated at 6 bar with socket D = 3 / 4 "x1" type
CALEFFI 527,530 to be installed on entry code
cold water to kettles full of funnels
exhaust exposed curve articulated D = 1 "art. 552160
in place
33 Expansion vessels seamed for membrane plants
water type attack with 555,024 CALEFFI code D = 3 / 4 "
24 liters preloaded with nitrogen to 1.5 bar
in place
34 Circulator electrical circuit recycling brand
Model GRUNDFOS UPS 25-60 B
having the following characteristics:
electric motor powered 1x230-240 V 50 Hz
Maximum Power 90 W 0.40 to
complete with fittings connecting
in place
35 Clocks weekly program of command
circulatory loop-type code CALEFFI 628,007
(to be agreed and match the electrical system)
in place
36 Thermostats command circulatory recycling brand
Code CALEFFI 621,000
in place
37 Butterfly valves with cast iron body GGG40, disc
steel AISI 304, EPDM seat type July
type EFFEBI model B201
in place
diameter DN 40
diameter DN 50
diameter DN 65
diameter DN 80
diameter DN 100
38 ball valves full bore
type EFFEBI 0101 series heavy chrome plated brass
double sealing system in Teflon.
in place
diameter 1 / 2 "
diameter 3 / 4 "
diameter 1 "
diameter 11 / 4 "
diameter 21 / 2 "
diameter 3 "
39 check valve disc inserted between flanges with body
brass and stainless steel disc
diameter DN 65
40 Check valves type ENOLGAS H0141 step
Total sabiato brass with gaskets
Fluoroelastomer and stainless steel spring.
in place
diameter 1 "
diameter 21 / 2 "
diameter 3 "
41 automatic air vent valve brass float
with taps interception CALEFFI type code
5021 MINICAL D.3 / 8 "complete reductions brass
364253rd code for installation in high places
in place
42 butterfly valves aa brand check mod. VFA 100
motorized used as deviatrive.
in place
Valve actuator 43 up to DN 100 powered 24 V
moving three-point brand CONTROLS mod. MDA 42
in place
Auxiliary microswitch 44 to be mounted on engine
For security, opening / closing throttle brand
CONTROLS mod. DMDA
in place
45 coated steel tubing Heavy Series
THERMO FM DALMINE type UNI 8863 with extremities
smooth welding head punched at every heat
80 cm for the realization of the lines in thermal power plant
including off-cuts, trims, fixtures, tanks
oxyacetylene and double coat of paint on rust
shares stripped graded in the following diameters:
in place
diameter 1 "DN 25
diameter 11 / 2 "DN 32
2 "diameter DN 50
diameter 21 / 2 "DN 65
diameter 3 "DN 80
diameter 4 "DN 100
6 "diameter DN 125
46 galvanized steel pipe and screw sleeve first
quality and workmanship in accordance with requirements
provided by DM 24-11-84 IVth especially heavy series
Hot stamped and marked with green paint every
80 cm. Type the words DALMINE FM GALVANIZED
UNI 8863 UNI 5745 SP IGQ 8603 for the realization
lines in thermal power stations including off-cuts, trims,
fixtures graded in the following diameters:
in place
diameter 1 / 2 "
diameter 3 / 4 "
diameter 1 "
diameter 11 / 4 "
diameter 21 / 2 "
diameter 3 "
47 steel pipe insulation to current view
within the thermal power plant including trims
cups made from rubber with a conductivity
of 0,035 Kcal / hx sqm. C ° x 30 mm thick with
external protection PVC
in place
48 Isolation of steel pipes running outside the
connection of pumps geotermichecompresi trims
cups made from rubber with a conductivity
of 0,035 Kcal / hx sqm. C ° x 30 mm thick with
external protection of aluminum sheet
in place
49 pipe welded steel with black preinsulated Fe360
polyurethane foam and HDPE sheath type ECOLINE
end with 'smooth welding head for
realization from the pump to the geothermal power station
Full: bends, fittings, trim pieces, offcuts,
fixtures and acetylene cylinders.
in place
diameter 3 "
diameter 4 "
50 drainage networks in high-density polyethylene AD brand
GEBERIT complete with special pieces, fittings, siphons
sleeves expansion, various accessories installed
according to specifications provided by the company for
the creation of links to the various equipment
in place
diameter 50 mm | GAS CENTRAL HEAT | | 51 high-density polyethylene pipe PE / UNI-ISO 4437 Type
UNI 316 for the construction of underground gas network B186
laid out according to UNI for the line
power from 270 KW thermal group developed
meters from the niche to the central thermal
Food group and for preparing future thermal
CYLINDER Villa including scraps and trims to weld
in place
diameter 63 mm
52 galvanized steel pipe and screw sleeve first
quality and workmanship in accordance with requirements
provided by DM 24-11-84 IVth especially heavy series
Hot stamped and marked with green paint every
80 cm. Type the words DALMINE FM GALVANIZED
UNI 8863 UNI 5745 SP 8603 IGQ painted yellow
for lines on demand including off-cuts, trims,
fixtures graded in the following diameters:
2 "diameter
53 ball valves full bore type
EFFEBI 0101 series heavy brass with double sist. of tenita
in place
diameter 11 / 2 "
2 "diameter
54 Dielectric Solder Joints installed according to UNI
leaving the soil DN 50 type OPPO
in place
55 gauge with methane gas sensing element
Precision Diaphragm type code CALEFFI 846,104
complete with tap exclusion code 846003rd
in place
56 Expansion Joints in stainless steel for methane
type code CALEFFI 842,008 from 11 / 2 "
in place | 57 unit microprocessor Gas leak detection
natural gas for power stations such LYC11 SIEMENS 230V AC
in place
Backup battery 58 Ah 12 V 4-6
in place
59 probe detecting methane gas type SIEMENS
model QAG13 / A
in place
60 normally closed solenoid type SIEMENS model
E57D threaded 2 "12V
in place
61 portable fire extinguisher 6 kg
in place
62 Safety signs composed of the following signs:
in place
Central heat
valves methane
extinguisher poratile
63 chimney for the formation of alveoli technical
containment pipe smoke original PP DN 160
meets the standards required by UNI 10845
pipe = 200mm consisting of modular elements in steel
AISLI 316L stainless steel with longitudinal welding plasma
cupels mineral wool insulation with 120 Kg / mc
thickness 30mm united by grafting a special glass
with gasket and locking clamps bloccti through
developed from the inspection chamber installed floor
the thermal power plant until after the coverage for a length
each of 14 meters, complete with everything you need to
make a montage to perfect rule of art.
NB THE QUANTITIES AND MEASURES MUST BE VERIFIED
ON-SITE FIRST ORDER OF THE MATERIALS.
in place | NETWORK
HEATING / COOLING AND WATER | | 64 high density polyethylene pipe PE AD to conduct water under pressure, according to UNI 7611/76 and UNI 7615/76, UNI type 312 for the implementation of water lines, fire containment meters underground from the cockpit to the municipal heating plant and the group of pressurization and the group itself all'interrato welded joints with complete fittings, trims, accessories stocked in the following diameters: 90 mm in diameter by PN 16
65 coated steel tubing Heavy Series UNI 8863 Thermo FM DALMINE type with smooth ends for butt welding hot-stamped every 80 cm for the realization of the lines seen in the basement by the boiler up to the individual vertical columns to the apartments and the houses to the point of zero off-cuts, trims, fixtures, and acetylene cylinders double coat of rustproof paint on the parts stripped graded in the following diameters: in diameter by 11 / 4 "diameter 11 / 2" diameter 2 "
diameter 21 / 2 "
diameter 3 "
66 copper pipes raw bars in heavy series
with UNI 6507-69 with 99.9% under the bone
phosphorus (P remaining 0.015% - 0.05%) according to the rules
ASTM for the realization of the risers and lines
leading up to the zero point including off-cuts, trims,
Clamping assorted in the following diameters
in place
diameter 22x1
diameter 28x1, 5
diameter 35x1, 5
diameter 42x1, 5
diameter 54x2
67 galvanized steel pipe and screw sleeve first
quality and workmanship in accordance with requirements
provided by DM 24-11-84 IVth especially heavy series
Hot stamped and marked with green paint every
80 cm. Type the words DALMINE FM GALVANIZED
UNI 8863 UNI 5745 SP IGQ 8603 for the realization of
lines seen in the basement of the power station and
of risers including offcuts, trims,
fixtures graded in the following diameters:
in place
diameter 1 / 2 "
diameter 3 / 4 "
diameter 1 "
diameter 11 / 2 "
2 "diameter
diameter 21 / 2 "68 Multilayer pipe consisting of inner layer of polyethylene
cross-linked binder layer, intermediate layer welded aluminum
head longitudinally bonded layer and polyethylene
high-density type of quality fittings GEBERIT MEPLA
offcuts, trims, fixtures, anchors, material
consumption varied, etc.. the relaizzazione lines from
risers counters divisional assorted diameters:
in place
diameter 20x2, 5
diameter 26x3
diameter 32x3
diameter 40x3, 5
69 Thermal insulation of pipes and under the main columns
copper trace conditioning through Flexible
Rubber (conductivity 0.040 W / m ° C), including the taping
joints with a special self-adhesive strip
in place
thickness 19 mm x 22
thickness 19 mm x 28
thickness 19 mm x 35
thickness 19 mm x 42
thickness 19 mm x 54 | 70 Thermal insulation of pipes of columns
Galvanized steel water by flexible rubber sheaths,
(conductivity 0.040 W / m ° C) including the taping of
joints with a special self-adhesive strip
in place
thickness 13 mm x 1 / 2 "(recirculation)
9 mm x 1 "(cold)
thickness 13 mm x 1 "(hot)
9 mm x 11 / 2 "(cold)
thickness 13 mm x 11 / 2 "(hot)
9 mm x 2 "(cold)
thickness 13 mm x 2 "(hot)
71 Thermal insulation of pipes made under track
in multilayer water by flexible rubber sheaths,
(conductivity 0.040 W / m ° C) including the taping of
joints with a special self-adhesive strip
in place
thickness 19 mm x 20 (recirculation)
9 mm x 26 (cold)
thickness 19 mm x 26 (warm)
9 mm x 32 (cold)
thickness 19 mm x 32 (warm)
9 mm x 40 (cold)
thickness 19 mm x 40 (warm)
72 Isolation of coated steel pipes for
heating / cooling installed in the ceiling of view
basement including special pieces with cups in
Rubber (conductivity 0.040 W / m ° C) with PVC protection
in place
40 mm
50 mm
73 galvanized steel pipe insulation for plants
install a water view on the ceiling of the basement
including special pieces with rubber cups
(conductivity 0.040 W / m ° C) with external protection PVC
in place
thickness 30 mm (cold)
40 mm
50 mm
74 ball valves full bore type
EFFEBI 0101 series heavy chrome plated brass with double
Teflon sealing system to dissect the distribution.
in place
diameter 1 / 2 "
diameter 3 / 4 "
diameter 1 "
diameter 11 / 2 "
2 "diameter
diameter 21 / 2 "
75 Balancing valves brand CALEFFI code 131 in
brass with pressure taps to graft for balance
distribution
in place
diameter 1 / 2 "
diameter 11 / 4 "
2 "diameter
76 anti water hammer brand CAZZANIGA by CAW
just above the water column in boxes inspected
in place
diameter 1 " | HEATING AND COOLING | | 77 Forms of users make CALEFFI 792,560 complete code:
● cassette sheet varnishes (RAL 9010),
● Dimensions: h = 650 - L = 600 - p = 140-150 mm;
● torque ball valves from 3 / 4 ";
● autoflow flow 1200 l / h (vary depending on the actual scope);
● Hydraulic insulated separator;
● Pump UPS 15-60, wheelbase 130 mm;
● Mini exhaust air (Series 337);
● drain tap (Series 560);
● template for heat meter (Series 7554);
● attacks positioning dual function water
health (Series 7941).
● supply 230 V (ac) - 50 Hz - 100 W.
NB Before you order check the flow rates of the single module
so as to specify the scope dell'autoflow and report
number of modules with primary attack on the right
Bring and codes autoflow
No. 3 code 125151st L60 600 l / h
No. 5 code 125151st L70 from 700 l / h
No. 3 code 125151st 1L0 from 1000 l / h
No. 1 code 125151st 1L2 from 1200 l / h
No. 1 code 125151st 1L4 from 1400 l / h
in place
78 user modules CALEFFI brand code 792561 (Unit
DP) with:
● cassette sheet varnishes (RAL 9010),
● Dimensions: h = 650 - L = 600 - p = 140-150 mm;
● torque ball valves from 3 / 4 ";
● autoflow flow 1200 l / h (vary according to the true scale)
● Hydraulic insulated separator;
● socket mounting pump wheelbase 130mm
● Mini exhaust air (Series 337);
● drain tap (Series 560);
● template for heat meter (Series 7554);
● attacks positioning dual function water
● supply 230 V (ac) - 50 Hz - 100 W.
NB Before you order check the flow rates of the single module
so as to specify the scope and degnalare the dell'autoflow
number of modules with primary attack on the right
in place
79 Circulator electric secondary separator unit DP
GRUNDFOS UPS 25-60/130 branded model set to
speed 2 with the following features:
electric motor powered 1x220-230 V 50 Hz
Maximum Power 70 W
Energy Class C
complete with fittings connecting
in place
80 user module built on site by the installer with
DQ brand components CALEFFI Unit consists of
following equipment:
● box painted sheet of containment equipment
adequate size
● torque ball valves from 11 / 2 ";
● autoflow, flow 4500 l / h code 1251814L5
● hydraulic separator insulated Code 548,006;
● torque valves ball from 11 / 4 ";
in place
81 Circulator electric secondary separator unit DQ
GRUNDFOS UPS 32-55 branded model set to
speed 2 with the following features:
electric motor powered 1x220-230 V 50 Hz
Maximum Power 115 W
Energy Class C
complete with fittings connecting
in place
82 brand recognized directly CALEFFI
CONTECH FAST code 7554 compounds each from:
● pair of temperature probes
● pair of wells Y-probes
● Volumetric meter
● electronic integrator with LCD display
in place
jet 3 / 4 "capacity 2.5 mc / h code 755,405
jet 1 "scale 3.5 mc / h code 755,406
83 Meter for Cold and hot sanitary water
reading room with shutoff valves and check valves
in place
health cold 1 / 2 "Code 794,140
sanitary hot 1 / 2 "Code 794141st
health cold 3 / 4 "Code 794,150
sanitary hot 3 / 4 "Code 794151st
84 Group of modulating heating and thermal regulation
Cooling brand CALEFFI code 171. (excluding units DQ)
attachment to the primary circuit 3 / 4 "M
attachment to the control group 1 "F with cap
attacks derivations circuit boards 3 / 4 "M - Ø 18 mm
Medium: water and glycol solution; maximum
percentage of glycol 30%
adjusting the temperature range 7 ÷ 78 ° C
primary input temperature range 5 to 100 ° C
maximum working pressure 10 bar
calibration by-pass differential collector panels 25 kPa
calibration by-pass differential primary circuit 10 kPa
thermometer scale 0 ÷ 80 ° C.
scale pressure gauge 0 ÷ 10 bar.
Outbound to plant collector panels with brass body
flow control valve with flow scale of 1 to 5 l / min;
return manifold for installation in panels with brass body,
valve.
regulating unit with three-way valve motorized
servomotor three points
Power supply 230 V - 50 Hz,
degree of protection IP 44
digital controller, power supply 230 V - 50 Hz
complete with temperature probes revelation gone
itorno and relative humidity.
Group panel on delivery with brass body.
bypass kit with brass body,
valve by-pass differential POM and stainless steel spring.
valves in brass and chrome plated brass ball.
safety thermostat: factory calibration 55 ° C ± 3 ° C
degree of protection IP 55, range contacts 10 A / 240 V.
three-speed UPS 25-60 pump (and UPS 25-80),
degree of protection IP 44.
insulation for the primary circuit of PE-X shell preforms.
supplied pre-assembled in metal box with lock,
depth adjustable from 110 to 150 mm,
complete with height adjustable floor supports
in place
Group N ° 5 derivations Code 1715E2
Group No. 6 derivations code 1715F2
Group No. 7 derivations code 1715G2
Group No. 8-lead code 1715H2
Group No. 9 derivations code 1715I2
85 diameter self-adaptive fittings for plastic pipes
diameter 17x1 brand code CALEFFI 680,535
in place
86 mechanical couplings with O-ring seal for copper
diameter 16x1 brand CALEFFI code 347516th
in place
87 electrothermal actuators brand CALEFFI code 656312th
Power supply 230 V (ac)
absorber system 3 W
flow auxiliary contact 0.8 A
degree of protection IP 40
power cable 80cm
in place
88 thermostats brand code CALEFFI 151,000
(to be agreed and match the electrical system)
in place
89 Carel Thermostats humidistats brand model
(to be agreed and match the electrical system)
in place
90 Thermostatic Valve type CALEFFI consist of:
valve chrome side cod. 401
thermostatic control head cod. 200000
pipe fitting for connecting copper pipe
single plate wall cover cod. 449800
in place
diameter 1 / 2 "
91 Manual valves per team in forged brass and
Nickel for radiators and copper pipe, type CALEFFI
cod. 401 full welding fittings for connection
the copper tube (dehumidifiers)
in place
diameter 1 / 2 " | 92 Holders manual printed and team brass
Nickel for radiators and copper pipe, type CALEFFI
cod. 431 full welding fittings for connection
the copper pipe and wall cover plate Sigolo (rad + deu)
in place
diameter 1 / 2 "
93 ball valves full bore type
EFFEBI 0101 series heavy chrome plated brass with double
Teflon sealing system for intercepting Dehumidifiers
in place
diameter 1 / 2 "94 type steel radiators Integrative IRSAP mod. NOVO
NOG060 01 mm 1808x600 painted at the factory and
Complete each of: air vent valves,
Support in painted steel shelves
in place
95 radiation crosslinked polyethylene tubing PE-Xa five
layers conforming to DIN 16892/93 with barrier antidiff.
oxygen to DIN 4726 and branded protective layer
UPONOR PePex 20 x 2.0 mm rolls of 480 m
in place
96 Fasteners for fastening plastic piping
preformed panels brand UPONOR FISSATUBO 17/20
in packs of 300 pieces
in place
97 printed polystyrene foam insulation boards with
coating polystyrene reinforced. Density 32 Kg / mc
Module 10cm brand UPONOR PREFORM 30/30
Overall thickness 60mm
Useful 30mm thick insulation
in place
98 rolls of polyethylene foam with perimeter edge band
Self-adhesive back and polyethylene sheet to lay
above the insulation. 10mm, height 15cm, brand
ABOARD PERIMETER UPONOR in rolls of 25 m
in place 99 Additive for screeds radiant normal for the Improvement of
characteristics of mechanical strength and conductivity
Thermal brand UPONOR Addittivi in 20 liter cans
in place
100 plastic guide for the proper curvature to 90 ° and protection
piping near the distribution manifold
brand UPONOR 90 ° HOSE CLIP 20
in place
101 Dehumidifiers Hydronic regenerative energy vertical
Recessed wall HIDROS brand model ID 25 V
● galvanized steel frame
● Condensate drain pan
● Air filter
● heat exchanger tube of freon (heat pipe) composed
two battery-powered heat transfer from refrigerant
biphasic (R134a)
● Battery powered heat water
Chilled water at low temperature (7 ° C)
● plurivelocità fan for moving air
● power supply Hz 230V/1/50
● Electrical power consumption 45 W
● electric power consumption 0.24 A
in place
102 molds in a preprogrammed dehumidifiers from icasso
Wall brand in HIDROS relaizzato galvanized steel
in place
103 Front Grille supply and return air to be applied to
Dehumidifiers vertical brand HIDROS
in place
104 Dehumidifiers Hydronic regenerative energy from horizontal
built-in countertop model brand HIDROS ID 25 O
● galvanized steel frame
● Condensate drain pan
● Air filter
● heat exchanger tube of freon (heat pipe) composed
two battery-powered heat transfer from refrigerant
biphasic (R134a)
● Battery powered heat water
Chilled water at low temperature (7 ° C)
● plurivelocità fan for moving air
● power supply Hz 230V/1/50
● Electrical power consumption 45 W
● electric power consumption 0.24 A
in place
105 Sewer galvanized steel in accordance with rules
UNI 5753 with a thickness of sufficient size
(sp. 6 / 10 in size larger side channels from 0 - to
300mm, sp. 8 / 10 size larger side channels
300mm to 750mm, sp. 1 mm in size side
more channels from 800mm to 1200mm,) with ribs
reinforcement for completion of the discharge plenum with
attacks circular canals connecting to flexible
Dehumidifiers horizontal built-in ceiling
classes required to complete special pieces, and clamping
everything needed to complete assembly of networks
(measure accurately at the site before the order of pieces)
in place
106 double wall flexible piping reinforced with aluminum
polyester film, coating insulating glass wool,
aluminum vapor outer fabric and polyester
TECNO-brand VENTIL Series T4
diameter 127
107 air blower with double row of fins individually
adjustable, extruded aluminum anodized natural brand
TECNO-VENTIL DAV model with dampers, subframe by
walled and plenum connecting flexible conduits
DAV-SC + 300x150 + CTM PSI2M (1x125)
DAV-SC + 500x150 + CTM PSI2M (2x125)
108 room air return grilles to be applied to ceiling
natural anodized extruded aluminum with acrylic fiber filter
TECNO-brand VENTIL model with DAV and counterframes
fixing clip for opening filter cleaning
AFA-F 600x300 + CTM
109 annealed copper tubing in rolls heavy series
referred to UNI 6507-69 with title 99.9%
bone phosphorus (P residual 0.015% - 0.05%)
according to ASTM coated with polyethylene
cross-linked closed cell foam under the law
10/91 type CUPEX for the realization of the lines
Radiator maintenance works in the following diameters:
in place
diameter 16x1
110 annealed copper tubing in rolls heavy series
referred to UNI 6507-69 with title 99.9%
bone phosphorus (P residual 0.015% - 0.05%)
according to ASTM coated with polyethylene
cross-linked closed-cell foam for air conditioning
type CUPEX for the realization of lines to dehumidifiers
performed in the following diameters:
in place
diameter 16x1
111 copper pipes raw bars in heavy series
with UNI 6507-69 with 99.9% under the bone
phosphorus (P remaining 0.015% - 0.05%) according to the rules
ASTM for the realization of its main points
zero to collectors including off-cuts, trims, clamping
sorted in the following diameters
in place
diameter 22x1
diameter 28x1, 5
diameter 35x1, 5
112 Thermal insulation of pipes under the main track
Copper conditioning through Flexible
rubber, including taping the joints with
special self-adhesive strip
in place
thickness 19 mm x 22
thickness 19 mm x 28
thickness 19 mm x 35 |
|
